Textured Brown Kraft Decorative Wrap Around Labels, 7.5 x 1.75 Inches, for Inkjet and Laser Printers with Template and Printing Instructions, 5 Sheets, 25 Labels (DW75)



  • $ 11.44

Only 0 left!

Click Here To Download MS Word Template

By downloading the blank template, you agree to our terms and conditions. 

These brown kraft wrap around labels are ideal for wine bottles, water bottles, jars, or anything else that requires a wrap around label. 

  • 5 sheets; 5 labels per sheet; total of 25 labels. Made in USA
  • Color: Brown
  • Shape: Rectangle, square corner
  • Size: 7.5 x 1.75 inches 
  • Sheet Size: 8.5” x 11”
  • Type: Permanent Self-Adhesive
  • Material: Paper, textured 
  • 100% Satisfaction Guaranteed

 Print Tips & Settings

â–º Compatible with both laser and inkjet printers.

â–º For best results, only use the manual by-pass tray to feed and print labels through.

► When printing labels, select “Auto” or “Plain Paper” settings from your printer settings. However, if the ink smears, flakes, or falls off during the peeling process, change the setting to another option, such as “Labels”, “Transparency” or “Glossy”.

â–º Allow up to 5 minutes for the labels to dry after you print them, otherwise the ink with smudge, break or flake.

â–º Print and feed one label into the printer at a time. This will prevent labels from sticking together and jamming and causing permanent damage to your printer.

â–º Do not run these labels through the printer more than once. Doing so will cause it to jam and may harm your printer.

Writing Tips

â–º These labels are intended to be used with a laser printer. However, you may write on them by only using a permanent fine point marker, such as a Sharpie. Do not use a paint marker, pen, pencil, or highlighter.

â–º You must allow up to 10 minutes for the labels to completely dry after you write on them. Failure to will cause smudging.

General Tips

â–º To peel these labels, fold each label at the corner and gently peel them off to avoid the ink from flaking.

â–º Store labels in a cool, dry place and avoid exposure to humidity. Avoid contact with heath, sun light, or flood lights.

â–º Do not allow oil from your fingers on the labels (use gloves if possible when handling these labels), since this may cause the ink to smear, peel, flake or smudge.

â–º These labels have a permanent adhesive back and cannot be removed once attached.

Label Specs

Color: Brown

Shape: Decorative Wrap Around Rectangle

Material: Paper, textured

Label Size: 7.5 x 1.75

Sheet Size: 8.5” x 11”

Labels per Sheet: 5

Top Margin: 0.625"

Bottom Margin: 0.625"

Length: 7.5”

Left Margin: 0.5”

Right Margin: 0.5”

Height: 1.75"

Horizontal Spacing: 0”

Vertical Spacing: 0.25”


Horizontal Pitch: 7.5"

Vertical Pitch: 2"


We Also Recommend