Textured Brown Kraft Arched Wine Bottle Labels, 3.5 x 2.4 Inches, with Downloadable Template and Printing Instructions, 5 Sheets, 40 Labels (WB35)SKU: SS-PE7P-GZXK
By downloading the blank template, you agree to our terms and conditions.Â
These brown kraft arched wine bottle labels are ideal choice for organic or natural wines. They are made of textured kraft paper and look earthly. These labels are not waterproof and intended to be used indoors.Â
- 5 sheets; 8 labels per sheet; total of 40 labels. Made in USA
- Color:Â BrownÂ
- Shape: Arched Rectangle / Wine Bottle
- Size: 3.5" x 2.4" Â
- Sheet Size: 8.5â€ x 11â€
- Type: Permanent Self-Adhesive
- Material: Paper (not waterproof)Â
- 100% Satisfaction Guaranteed
â–º The templates for these wine labels will appear square. Please place your artwork inside the rectangular areas and adjust it accordingly until you have found the proper positioning for your artwork. Print several samples on a plain paper and hold it on top of the actual label to determine the exact positioning of your artwork before printing on the actual labels.
Print Tips & Settings
â–ºÂ Compatible with laser and inkjet printers.
â–º This label has margins that may not be printable because the margins are less than 0.25â€. If you wish to print to the edge of these labels, please check your printerâ€™s ability to ensure it is capable of doing so.
â–º For best results, only use the manual by-pass tray to feed and print labels through.
â–º When printing weatherproof labels, select â€œAutoâ€ or â€œPlain Paperâ€ settings from your printer settings. However, if the ink smears, flakes, or falls off during the peeling process, change the setting to another option, such as â€œLabelsâ€, â€œTransparencyâ€ or â€œGlossyâ€.
â–º Allow up to 5 minutes for the labels to dry after you print them, otherwise the ink with smudge, break or flake.
â–º Print and feed one label into the printer at a time. This will prevent labels from sticking together and jamming and causing permanent damage to your printer.
â–º Do not run these labels through the printer more than once. Doing so will cause it to jam and may harm your printer.
â–º These labels are intended to be used with a laser printer. However, you may write on them by only using a permanent fine point marker, such as a Sharpie. Do not use a paint marker, pen, pencil, or highlighter.
â–º You must allow up to 10 minutes for the labels to completely dry after you write on them. Failure to will cause smudging.
â–º To peel these labels, fold each label at the corner and gently peel them off to avoid the ink from flaking.
â–º Store labels in a cool, dry place and avoid exposure to humidity. Avoid contact with heath, sun light, or flood lights.
â–º Do not allow oil from your fingers on the labels (use gloves if possible when handling these labels), since this may cause the ink to smear, peel, flake or smudge.
â–º These labels have a permanent adhesive back and cannot be removed once attached.
Shape: Arched Rectangle / Wine Bottle
Material: Paper (not weatherproof)
Label Size: 3.5" x 2.4" Â
Sheet Size: 8.5â€ x 11â€
Labels per Sheet: 8
Top Margin: 0.5035â€
Bottom Margin: 0.5035â€
Label Height: 2.4â€
Left Margin: 0.6875â€
Right Margin: 0.6875â€
Label Length: 3.5â€
Horizontal Spacing: 0.125â€
Vertical Spacing: 0.1269â€
Horizontal Pitch: 3.625â€
Vertical Pitch: 2.53â€
We Also Recommend
Amber and Cobalt Blue 32 oz Large Boston Round Plastic Bottles with Black Lotion Pump + Labels
Cobalt Blue Glass Boston Round Bottle with Black Trigger Spray (4 Pack)
10 oz Clear Glass Borosilicate Jar with Bamboo Silicone Sealed Lid (6 Pack)
8 oz Amber Glass Boston Round Bottle with Black Trigger Sprayer (4 Pack)
- choosing a selection results in a full page refresh