Textured Brown Kraft 1.5 x 0.75 Inch Oval Labels with Downloadable Template and Printing Instructions, 5 Sheets, 275 Labels (OK15)

Click Here To Download MS Word Template

By downloading the blank template, you agree to our terms and conditions. 

These brown kraft oval labels are compatible with both laser and inkjet printers and have a permanent self-adhesive back. Ideal for home or office, they can be used on any natural or organic products, such as bottles, jars and cans. They are made of textured paper, so they are intended for indoor use since they are not waterproof. 

• 5 sheets; 55 labels per sheet; total of 275 labels. Made in USA
• Color: Brown
• Shape: Round
• Size: 1.5 x 0.75 inches
• Sheet Size: 8.5” x 11”
• Type: Permanent Self-Adhesive
• Material: Paper
• 100% Satisfaction Guaranteed

Template Note

► The templates for the 1.5 x 0.75 inch oval labels will appear square. To help you properly place your text, the template includes a dark oval layout within the square borders. Please use the layout as a guide to place your text. Print several samples to determine the exact positioning of your final text before printing on the actual labels.

► The dark oval layouts are merely a guide and should not print. In the case the oval layouts print, you may need to disable them. To do so in Microsoft Word, go to File and then click on Options, then click on Display. On the bottom right hand side, you will see the option Print Drawings created in Word – please make sure this box is NOT checked.

Print Tips & Settings

â–º FOR INDOOR USE ONLY. LABELS ARE NOT WATERPROOF.

â–º Compatible with inkjet and laser printers.

â–º For best results, only use the manual by-pass tray to feed and print labels through.

► When printing these labels, select “Auto” or “Plain Paper” settings from your printer settings. However, if the ink smears, flakes, or falls off during the peeling process, change the setting to another option, such as “Labels”, “Transparency” or “Glossy”.

â–º Allow up to 5 minutes for the labels to dry after you print them, otherwise the ink will smudge, break or flake.

â–º Print and feed one label into the printer at a time. This will prevent labels from sticking together and jamming and causing permanent damage to your printer.

â–º Do not run these labels through the printer more than once. Doing so will cause it to jam and may harm your printer.

Writing Tips

â–º These labels are intended to be used with a laser printer. However, you may write on them by only using a permanent fine point marker, such as a Sharpie. Do not use a paint marker, pen, pencil, or highlighter.

â–º You must allow up to 10 minutes for the labels to completely dry after you write on them. Failure to will cause smudging.

General Tips

â–º To peel these labels, fold each label at the corner and gently peel them off to avoid the ink from flaking.

â–º Store labels in a cool, dry place and avoid exposure to humidity. Avoid contact with heath, sun light, or flood lights.

â–º Do not allow oil from your fingers on the labels (use gloves if possible when handling these labels), since this may cause the ink to smear, peel, flake or smudge.

â–º These labels have a permanent adhesive back and cannot be removed once attached.

Label Specs