Shiny Gold Foil Heart Shaped Labels, 1.5 x 1.5 Inches, for Laser Printers with Downloadable Template and Printing Instructions, 5 Sheets, 120 Labels (TG15)

Click Here To Download MS Word Template

By downloading the blank template, you agree to our terms and conditions. 

These heart shaped shiny gold foil labels are perfect for any DIY project, arts, crafts, mailers, sweet sixteen, valentines day or for your jars and bottles. 

These labels are made of standard paper, so they are intended to be used indoor and are not waterproof. 

• 5 sheets; 15 labels per sheet; total of 75 labels. Made in USA
• Color: Shiny Gold Foil
• Shape: Heart
• Label Size: 1.5 x 1.5 Inches
• Sheet Size: 8.5” x 11”
• Type: Permanent Self-Adhesive
• Material: Metalized Paper
• 100% Satisfaction Guaranteed

Template Note

â–º The templates for the heart shaped labels will appear square. To help you properly place your text, the template includes a heart layout within the square borders. Please use this as a guide to place your text. Print several samples to determine the exact positioning of your final text before printing on the actual labels.

► The heart layout is merely a guide for text placement and should not print. In the case the heart layout prints, you may need to disable it. To do so in Microsoft Word, go to File and then click on Options, then click on Display. On the bottom right hand side, you will see the option Print Drawings created in Word – please make sure this box is not checked. If you cannot disable it, please contact us and we will send you a blank template.

Print Tips & Settings

► ONLY USE A LASER PRINTER. IF YOU ARE NOT SURE ABOUT YOUR PRINTER TYPE, DO NOT USE THESE LABELS. CONTACT US SO WE CAN FURTHER ASSIST YOU. 

â–º For best results, only use the manual by-pass tray to feed and print labels through.

► When printing these labels, select “Auto” or “Plain Paper” settings from your printer settings. However, if the ink smears, flakes, or falls off during the peeling process, change the setting to another option, such as “Labels”, “Transparency” or “Glossy”.

â–º Allow up to 5 minutes for the labels to dry after you print them, otherwise the ink with smudge, break or flake.

â–º Print and feed one label into the printer at a time. This will prevent labels from sticking together and jamming and causing permanent damage to your printer.

â–º Do not run these labels through the printer more than once. Doing so will cause it to jam and may harm your printer.

Writing Tips

â–º These labels are intended to be used with a laser printer. However, you may write on them by only using a permanent fine point marker, such as a Sharpie. Do not use a paint marker, pen, pencil, or highlighter.

â–º You must allow up to 10 minutes for the labels to completely dry after you write on them. Failure to will cause smudging.

General Tips

â–º To peel these labels, fold each label at the corner and gently peel them off to avoid the ink from flaking.

â–º Store labels in a cool, dry place and avoid exposure to humidity. Avoid contact with heath, sun light, or flood lights.

â–º Do not allow oil from your fingers on the labels (use gloves if possible when handling these labels), since this may cause the ink to smear, peel, flake or smudge.

â–º These labels have a permanent adhesive back and cannot be removed once attached.

Label Specs