Waterproof Clear Gloss 1.5 Inch Circle Perforated Center Seal Labels for Laser Printers with Downloadable Template and Printing Instructions, 5 Sheets, 100 Labels (RC15)



  • $ 11.44

Only 0 left!

Click Here To Download MS Word Template

By downloading the blank template, you agree to our terms and conditions. 

These clear gloss round labels are made with polyester paper and are waterproof when printed on with a laser Pinter. Each label has a permanent adhesive back. These labels are perforated in the center, making them ideal for sealing envelopes, brochures, invitations, or any project or product which requires a clear perforated label. 

  • 5 sheets; 20 labels per sheet; total of 100 labels. Made in USA
  • Color: Clear Gloss
  • Shape: Round
  • Size: 1.5" Diameter, Perforated Center
  • Sheet Size: 8.5” x 11”
  • Type: Permanent Self-Adhesive
  • Material: Polyester 
  • 100% Satisfaction Guaranteed

Template Note

► The templates for the 1.5” circles will appear square. To help you properly place your text, the template includes a dark circle within the square borders. Please use the dark circles as a guide to place your text. Print several samples to determine the exact positioning of your final text before printing on the actual labels.

► The dark circles are merely a guide and should not print. In the case the dark circles print, you may need to disable them. To do so in Microsoft Word, go to File and then click on Options, then click on Display. On the bottom right hand side, you will see the option Print Drawings created in Word – please make sure this box is not checked.

Print Tips & Settings

â–º These labels are compatible with most laser printers. Do NOT use an inkjet printers as the ink will smudge or flake.

â–º For best results, only use the manual by-pass tray to feed and print labels through.

► When printing these labels, select  “Labels”, Transparency” or “Glossy” as you materials setting. If the labels appear to smudge or are too faint, adjust the material setting to "Heavy" or "Cardstock" type. 

â–º Allow up to 5 minutes for the labels to dry after you print them, otherwise the ink with smudge, break or flake.

â–º Print and feed one label into the printer at a time. This will prevent labels from sticking together and jamming and causing permanent damage to your printer.

â–º Do not run these labels through the printer more than once. Doing so will cause it to jam and may harm your printer.

Writing Tips

â–º These labels are intended to be used with a laser printer. However, you may write on them by only using a permanent fine point marker, such as a Sharpie. Do not use a paint marker, pen, pencil, or highlighter.

â–º You must allow up to 10 minutes for the labels to completely dry after you write on them. Failure to will cause smudging.

General Tips

â–º To peel these labels, fold each label at the corner and gently peel them off to avoid the ink from flaking.

â–º Store labels in a cool, dry place and avoid exposure to humidity. Avoid contact with heath, sun light, or flood lights.

â–º Do not allow oil from your fingers on the labels (use gloves if possible when handling these labels), since this may cause the ink to smear, peel, flake or smudge.

â–º These labels have a permanent adhesive back and cannot be removed once attached.

Label Specs

Color: Clear gloss

Shape: Round, Perforated Center

Material: Polyester 

Label Size: 1.5” Diameter

Sheet Size: 8.5” x 11”

Labels per Sheet: 20

Top Margin: 0.75”

Bottom Margin: 0.75”

Height: 1.5”

Left Margin: 0.5”

Right Margin: 0.5”

Length: 1.5”

Horizontal Spacing: 0.5”

Vertical Spacing: 0.5”


Horizontal Pitch: 2”

Vertical Pitch: 2”


Customer Reviews

Based on 1 review Write a review

We Also Recommend