Textured Brown Kraft 3.875 x 1.875 Inch Semi-Oval Labels for Laser Printer with Downloadable Template and Printing Instructions, 5 Sheets, 50 Labels (BK38)

SKU: 3K-68CD-B6VL

JUVITUS

  • $ 11.44

Only 0 left!

Click Here To Download MS Word Template

By downloading the blank template, you agree to our terms and conditions. 

These textured brown kraft paper labels have an earthy look and give a natural look to any product. Ideal for decorating homemade, organic or natural products, such as essential oil bottles, spice jars, baby bottles, or anything else that requires a natural brown look!

  • 5 sheets; 10 labels per sheet; total of 50 labels. Made in USA
  • Color: Brown
  • Shape: Semi-Oval
  • Size: 3.875 x 1.875 Inch
  • Sheet Size: 8.5” x 11”
  • Type: Permanent Self-Adhesive
  • Material: Paper
  • 100% Satisfaction Guaranteed

Template Note

â–º The templates for these semi-oval labels will appear square. Please place your artwork inside the square areas and adjust it accordingly until you have found the proper positioning for your artwork. Print several samples on a plain paper and hold it on top of the actual label to determine the exact positioning of your artwork before printing on the actual labels.

Print Tips & Settings

► Compatible with laser or inkjet printers. 

â–º For best results, only use the manual by-pass tray to feed and print labels through.

► When printing on these labels, select “Auto” or “Plain Paper” settings from your printer settings. However, if the ink smears, flakes, or falls off during the peeling process, change the setting to another option, such as “Labels”, “Transparency” or “Glossy”.

â–º Allow up to 5 minutes for the labels to dry after you print them, otherwise the ink with smudge, break or flake.

â–º Print and feed one label into the printer at a time. This will prevent labels from sticking together and jamming and causing permanent damage to your printer.

â–º Do not run these labels through the printer more than once. Doing so will cause it to jam and may harm your printer.

Writing Tips

â–º These labels are intended to be used with a printer. However, you may write on them by only using a permanent fine point marker, such as a Sharpie.

â–º You must allow up to 10 minutes for the labels to completely dry after you write on them. Failure to will cause smudging.

General Tips

â–º To peel these labels, fold each label at the corner and gently peel them off to avoid the ink from flaking.

â–º Store labels in a cool, dry place and avoid exposure to humidity. Avoid contact with heath, sun light, or flood lights.

â–º Do not allow oil from your fingers on the labels (use gloves if possible when handling these labels), since this may cause the ink to smear, peel, flake or smudge.

â–º These labels have a permanent adhesive back and cannot be removed once attached.

Label Specs

Color: Brown

Shape: Semi-Oval

Material: Textured paper finish

Label Size: 3.875” x 1.875”

Sheet Size: 8.5” x 11”

Labels per Sheet: 10

Top Margin: 0.5625

Bottom Margin: 0.5625"

Height: 1.875”

Left Margin: 0.3125"

Right Margin: 0.3125"

Width: 3.875”

Horizontal Spacing: 0.125"

Vertical Spacing: 0.125"

BK38

Horizontal Pitch: 4”

Vertical Pitch: 2”

UPC 095509907981



We Also Recommend