Shiny Gold Foil 3" x 2" Round Corner Rectangle Labels For Laser Printers With Template and Printing Instructions, 5 Sheets, 50 Labels (GF32)

Click Here To Download MS Word Template

By downloading the blank template, you agree to our terms and conditions. 

These shiny gold foil labels are made with metalized paper with permanent adhesive. These labels have a shiny reflective golden surface and they are ideal for any project or product which requires a touch of high end luxury look. 

• 5 sheets; 10 labels per sheet; total of 50 labels. Made in USA
• Color: Shiny Gold Foil
• Shape: Round Corner Rectangle
• Size:  3" x 2"
• Sheet Size: 8.5” x 11”
• Type: Permanent Self-Adhesive
• Material: Metalized Paper
• 100% Satisfaction Guaranteed

 Print Tips & Settings

► ONLY USE A LASER PRINTER WITH THESE LABELS. IF YOU’RE NOT SURE OF YOUR PRINTER TYPE, PLEASE CONTACT US FOR ASSISTANCE.

â–º For best results, only use the manual by-pass tray to feed and print labels through.

► When printing these labels, select “Auto” or “Plain Paper” settings from your printer settings. However, if the ink smears, flakes, or falls off during the peeling process, change the setting to another option, such as “Labels”, “Transparency” or “Glossy”.

â–º Allow up to 5 minutes for the labels to dry after you print them, otherwise the ink with smudge, break or flake.

â–º Print and feed one label into the printer at a time. This will prevent labels from sticking together and jamming and causing permanent damage to your printer.

â–º Do not run these labels through the printer more than once. Doing so will cause it to jam and may harm your printer.

Writing Tips

â–º These labels are intended to be used with a laser printer. However, you may write on them by only using a permanent fine point marker, such as a Sharpie. Do not use a paint marker, pen, pencil, or highlighter.

â–º You must allow up to 10 minutes for the labels to completely dry after you write on them. Failure to will cause smudging.

General Tips

â–º To peel these labels, fold each label at the corner and gently peel them off to avoid the ink from flaking.

â–º Store labels in a cool, dry place and avoid exposure to humidity. Avoid contact with heath, sun light, or flood lights.

â–º Do not allow oil from your fingers on the labels (use gloves if possible when handling these labels), since this may cause the ink to smear, peel, flake or smudge.

â–º These labels have a permanent adhesive back and cannot be removed once attached.

Label Specs