Premium Waterproof White Matte Arched Wine Bottle Labels, 3.5 x 2.4 Inches, for Laser Printers with Downloadable Template and Printing Instructions, 5 Sheets, 40 Labels (WN35)

Click Here To Download MS Word Template

By downloading the blank template, you agree to our terms and conditions. 

These white premium arched wine bottle labels are made of polyester so they are waterproof and highly durable. They are the ideal choice for any large bottle which needs a weatherproof durable label!

  • 5 sheets; 8 labels per sheet; total of 40 labels. Made in USA
  • Color: White
  • Shape: Arched Rectangle / Wine Bottle
  • Size: 3.5" x 2.4"  
  • Sheet Size: 8.5” x 11”
  • Type: Permanent Self-Adhesive
  • Material: Weatherproof Polyester
  • 100% Satisfaction Guaranteed

► The templates for these wine labels will appear square. Please place your artwork inside the rectangular areas and adjust it accordingly until you have found the proper positioning for your artwork. Print several samples on a plain paper and hold it on top of the actual label to determine the exact positioning of your artwork before printing on the actual labels.

Print Tips & Settings

► Only use a laser printer. Do not use an inkjet printer or a photocopier as the ink will smudge or flake.

► This label has margins that may not be printable because the margins are less than 0.25”. If you wish to print to the edge of these labels, please check your printer’s ability to ensure it is capable of doing so.

► For best results, only use the manual by-pass tray to feed and print labels through.

► When printing weatherproof labels, select “Auto” or “Plain Paper” settings from your printer settings. However, if the ink smears, flakes, or falls off during the peeling process, change the setting to another option, such as “Labels”, “Transparency” or “Glossy”.

► Allow up to 5 minutes for the labels to dry after you print them, otherwise the ink with smudge, break or flake.

► Print and feed one label into the printer at a time. This will prevent labels from sticking together and jamming and causing permanent damage to your printer.

► Do not run these labels through the printer more than once. Doing so will cause it to jam and may harm your printer.

Writing Tips

► These labels are intended to be used with a laser printer. However, you may write on them by only using a permanent fine point marker, such as a Sharpie. Do not use a paint marker, pen, pencil, or highlighter.

► You must allow up to 10 minutes for the labels to completely dry after you write on them. Failure to will cause smudging.

General Tips

► To peel these labels, fold each label at the corner and gently peel them off to avoid the ink from flaking.

► Store labels in a cool, dry place and avoid exposure to humidity. Avoid contact with heath, sun light, or flood lights.

► Do not allow oil from your fingers on the labels (use gloves if possible when handling these labels), since this may cause the ink to smear, peel, flake or smudge.

► These labels have a permanent adhesive back and cannot be removed once attached.

Label Specs

 

Color: White

Shape: Arched Rectangle / Wine Bottle

Material: Polyester (weatherproof)

Label Size: 3.5" x 2.4"  

Sheet Size: 8.5” x 11”

Labels per Sheet: 8

Top Margin: 0.5035”

Bottom Margin: 0.5035”

Label Height: 2.4”

Left Margin: 0.6875”

Right Margin: 0.6875”

Label Length: 3.5”

Horizontal Spacing: 0.125”

Vertical Spacing: 0.1269”

095509908322

Horizontal Pitch: 3.625”

Vertical Pitch: 2.53”

Code: WN35

 

SKU#: 095509908322


Related Items